FIBRE GEAR - MEBA

Startrite MEBA Fibre Gear, suitable for the SM250 & SM320.

IMPORTANT – Please ensure you match the fibre gear you purchase with the one on your MEBA saw already, as there are two types. See below the product table for more information on fitting the Fibre Gear.

FITTING INSTRUCTIONS ARE UNDER THE PRODUCT TABLE. 

Startrite MEBA Fibre Gear, Old and new gear.
    Product CodeNAME (CLICK FOR DETAILS)Price - Exc VATStockBuy
    MEBAGEAR16 TOOTH FIBRE GEAR (NEW TYPE) 59 O/D TEETH 26 W£73.95

    In stock

    MEBAGEAR-OLD16 TOOTH FIBRE GEAR (OLD TYPE) 54 O/D TEETH 20 W£73.95

    In stock

    Important Information – Fitting MEBA Fibre Gear

    • Failure of this gear is normally due to a secondary fault. Before fitting the new gear ensure all broken teeth are removed from the bandwheel drive gear & it is thoroughly cleaned & lightly greased.
    • Failure of the fibre gear can be caused by the bandsaw blade jamming in the guide system, failure of the idle or drive bandwheel bearings or bad operator practice. These secondary faults MUST be addressed otherwise the new gear will suffer premature failure.
    • Ensure you have bought the fibre gear that matches the one previously in your MEBA saw.

    If you require any further information or assistance on this matter please fill in our contact form and we will call you back. Our contact form can be found here.